Does the Quad 66 Pre have a built-in phono preamp for moving-magnet turntables?
Yes, the Disc input includes a module compatible with most moving-magnet cartridges, with a ground connection available for the turntable.
How are volume and balance controlled on the Quad 66 Pre?
This is done using the rotary knobs on the remote control: one for volume and one for balance, with no controls on the main unit itself.
What connections are available to the amplifier?
The preamplifier's output is 0.5 volts, suitable for transistor amplifiers; the signal connectors are phono (RCA) jacks.
How many inputs are there, and what types of sources can be connected?
There are seven inputs: Disc, CD, Radio, A-V, Aux1, Aux2, and Tape, with tape monitoring and an anti-hum circuit for A-V and Aux1.
Is there a standby function to turn everything off with a single button?
Yes, the Quad 66 Pre can be put into standby mode using the remote control, which also turns off any devices connected to the AC auxiliary outlet.
Can the control panel operate without a battery?
Yes, if the control panel’s battery is dead, it can be powered directly through the DC power socket on the front of the preamp.
Does the Quad 66 Pre support control of an external CD player?
Yes, the control panel can control CD players that use the RC-5 infrared code, in addition to Quad’s own CD players.
What frequency response and distortion can be expected from the various inputs?
For all inputs except Disc, the frequency response is ±0.3 dB from 15 Hz to 20 kHz; for Disc, the RIAA response is flat within 0.5 dB from 30 Hz to 20 kHz; distortion is a maximum of 0.05% in the worst-case scenario.
Can the Quad 66 Pre have separate modules for Disc inputs?
Yes, the Disc input is modular: other modules are available if a different phono specification is desired.
What filters and tone controls are available, and how do you adjust them?
There are separate buttons for Tilt, Bass Step, and two filters; these are adjusted using the remote control, each with two settings.